2005 Chrysler 300 2.7L V6 Spark Plugs and Plenum Gasket Replace

I want to share this video about changing spark plugs and plenum gaskets on a 2005 Chrysler 300 2.7L v6 engine. I forgot to mention that you should change or clean out the PCV valve because it is almost impossible to get to when the plenum is on. You might also want to double check the torque specs for your own piece of mind, I torqued mine to 7 1/2 ft lbs. Make sure you get the metal egr tube in the back on correctly without tearing the rubber washer, it’s tricky. You might want to take the egr tube off from the other end at the exhaust manifold so you don’t bend it.Thanks For Watching. Jeff